Ceroc Scotland Forum - View Single Post

**El Salsero Gringo** · 10th-March-2006, 08:36 AM

Hi Ducasi,

That's brilliant. The commands actually have to be passed over a telnet session to a particular address and port (192.168.128.100 port 1829, say) - how do I use a network socket rather than ttya?

Also (not really related) question: how do I configure the unit to run a terminal session on serial port 1 so I can use a laptop with say, Hyperterminal to log in to the unit?

Thanks!

10th-March-2006, 08:36 AM	#4 (permalink)
El Salsero Gringo Ceroc Teacher Join Date: Jan 2005 Location: London Posts: 4,881 Status: No Status Rep Power: 4 Rep.: 2374	Re: Linux: automatic modem configuration Hi Ducasi, That's brilliant. The commands actually have to be passed over a telnet session to a particular address and port (192.168.128.100 port 1829, say) - how do I use a network socket rather than ttya? Also (not really related) question: how do I configure the unit to run a terminal session on serial port 1 so I can use a laptop with say, Hyperterminal to log in to the unit? Thanks!